SignatureCAD Logo

Contact UsSite Map


Home / Support / Squiggle

Squiggle Support Center


Adding an HPGL or HPGL/2 print driver

Page 4 of 7


Back Next
  1. To install an HPGL or HPGL/2 print driver, we need to select the proper printer manufacturer and model. In this example, we chose the HP DesignJet 750C (E/A0) Color device (see Figure 4). Click Next to select the print driver.

    NOTE: The DesignJet 750C works nicely and is usually included in a typical Windows installations, but other HPGL or HPGL/2 print drivers can also be used. If you have an HPGL or HPGL/2 print driver on disk, click the Have Disk button and follow the instructions to install it.

    Figure 4. Install Printer Software


Page 4 of 7


Back Next




Home Company Contact Us Store Site Map

Copyright © 2006 SignatureCAD. All rights reserved.